S1081 - Harness Tape

S1081 is a modified, self-amalgamating, non flame retarded, polyolefin based harness tape. It has a continuous operating temperature of +80°C to +130°C and a self amalgamating temperature of +120°C.

Typical Applications
S1081 is used as a protective wrap on damaged cables and irregular shapes where it is not practical to install a heat shrinkable moulded part or tubing. When heat in excess of 120°C is applied, the tape shrinks lengthwise and self-amalgamates, forming a tightly fitting, continuous cover.

Installation Guidelines
Tightly wrap the S1081 tape around the substrate using a 50% overlap.The free end of the tape may be secured by ‘tacking’ with a soldering iron or hot air gun. The entire taped area should then be heated in excess of 120°C for 15 minutes.This will cause the tape to amalgamate. For an effective moisture seal with low fire hazard material, the S1030 hot melt adhesive tape should be used at both ends of the assembly, placing it under the layer of S1081 tape.

Operating Temperature Range
• -80°C to +130°C

Download PDF HERE!